Does the plus server support splitting?  I couldn't get it to rebroadcast
the incoming streams on my first try either.

John


On Fri, 28 Nov 2003 09:40:44 GMT,
   "Victor Sawma" (vsawma at hotmail.com) writes: 
> 
> Hi,
> 
> My question is related to configuring the Helix server Plus for push and 
> pull splitting.
> The administration section does not have any Transmitter/Receiver section 
> under
> the Broadcast Distribution section. Hence, configuring the server for 
> pull/push
> splitting is not possible except by manually editing the configuration file.
> 
> I have read the server documentation and the server configuration 
> documentation
> and updated the configuration file manually (as required in the 
> doucmentation) but
> nothing worked as intended.
> 
> My architecture includes an encoder, two servers, and a player.
> The two servers have IP addresses 200.200.200.1 and 200.200.200.2 
> respectively.
> The first server (200.200.200.1) is intended to receive the stream from the
> encoder and split it over to the second server (200.200.200.2)
> 
> The encoder is working properly. It delivers the stream to the first server 
> using push password-only login via TCP to port range 30001-30020.
> 
> I have tried all possible ways to connect server 1 to server 2 whether by 
> push or pull split but nothing is working.
> 
> I noticed that the receiver is opening the ports for reception, however the 
> transmitter is not sending any streams.
> 
> I am using Helix Server PLUS (which must support splitting).
> 
> If this is a server defect, please point me to where I can get a patch.
> Otherwise, please provide me with a sample configuration for the two servers
> (transmitter and receiver).
> 
> Best regards,
> 
> Victor
> 
> _________________________________________________________________
> Tired of spam? Get advanced junk mail protection with MSN 8. 
> http://join.msn.com/?page=features/junkmail
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe at helix-server.helixcommunity.org
> For additional commands, e-mail: dev-help at helix-server.helixcommunity.org
> 

---------------------------------------------------------------------
To unsubscribe, e-mail: dev-unsubscribe at helix-server.helixcommunity.org
For additional commands, e-mail: dev-help at helix-server.helixcommunity.org