[Helix-producer-dev] Live broadcasting issueon focus focus6888 at yahoo.com
Hi, Sujeet, first thanks for the reply. A couple clarification based on your message: 1. I suppose your rmserver.cfg, is hlxserver.cfg in the current release. 2. I didn't find any section in *.cfg file that has those definitions in your email. Anyway, I made a little progress by using password only authentication (port number doesn't really matter here, i can specify 8080 which is my Helix http port, or not specify at all), producer.exe -i c:\test.avi -o test.rm -sp :producerpassword at 192.168.1.3/live.rm It seems the authentication error is gone, but when I use a RealPlayer to try to play the live stream, realplayer rtsp://192.168.1.3/broadcast/live.rm, The player says the link doesn't exist. And I checked Helix server logs, both error.log and access.log, error.log: 16-Feb-2007 07:02:46.UNKNOWN tmplgpln(4607): 50: Error retrieving URL `broadcast/live.rm' \(Invalid path) access.log has the error: "GET broadcast/live.rm RTSPT/1.0" 404 0 [Lin\ux_2.6_10.0.0.0_play32_RN01_EN_586] [512ae9b1-bdc7-11db-f665-4d97144fcbdb] [Stat3:187|0|ST\OP|;][Stat4:0 0 0 0|0|0| 0 2] 0 0 0 0 0 12 I don't know what is going. I thought the /broadcast in Helix Server 11 is the default mount point which works with with Helix Producer 11's Push broadcasting. BTW, I also set the SecureRBSEncoder Realm and correpsonding user name/password. Any suggestion to diagnose the problem will greatly appreciated. Frank Sujeet Kharkar <skharkar at real.com> wrote: In command line that you are using -sp username:password at ipaddress:port/streamname the port specified should be HTTP port of the server. Since default installation of server uses 50001-50050 as ports for receivers dynamically created by mount point encfs, my assumption is that is not the configured HTTP port. Example config entries in rmserver.cfg file specifying concerned ports. You should be able to find more information in help file installed with producer (producer -m) in following chapters. Chapter 14: Using the Command-Line Application Chapter 11: Running a Broadcast Thanks, Sujeet -----Original Message----- From: helix-producer-dev-bounces at helixcommunity.org [mailto:helix-producer-dev-bounces at helixcommunity.org] On Behalf Of on focus Sent: Friday, February 16, 2007 3:29 AM To: helix-producer-dev at helixcommunity.org Subject: [Helix-producer-dev] Live broadcasting issue Hi, On Windows platform, I am using both Producer 11 and Sever 11_1 to do acount-based unicast broadcsting following the documention. After setup, I launched server and then issue the commend producer.exe -i c:\test.avi -o test.rm -sp producer:producer at 192.168.1.3:50001/live.rm But the producer immediately outputs the error message: BroadcastDist: Unrecognized option config. BroadcastDistribution.Destinations.19216813.Authentication.StatsInterval Error: Failed to establish a TCP connection with server 192.168.1.3 for authentication. Both my producer and server are on the same machine 192.168.1.3 and I turned off the firewall compeletely. I also tried this with server sitting on different machine, but it is same result. I don't know what is going on. And didn't find any documents that describe the problem either. thanks for any suggestions. Frank --------------------------------- Never miss an email again! Yahoo! Toolbar alerts you the instant new Mail arrives. Check it out. _______________________________________________ Helix-producer-dev mailing list Helix-producer-dev at helixcommunity.org http://lists.helixcommunity.org/mailman/listinfo/helix-producer-dev --------------------------------- Looking for earth-friendly autos? Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center. --------------------------------- It's here! Your new message! Get new email alerts with the free Yahoo! Toolbar.