Thanks Greg,

I set those environments following your advice.
Still there're some other problems, the first build error is:
"NMAKE : fatal error U1073: don't know how to make
'C:\source\helix\protocol_dist\rtsp\wins-dbg32\rdtclntlib.lib"

After searching in the make-files, I found it's one of the targets required
in "clntcoredll.mak", but no build methods for it.

Would you help me again?

My environments are:

1) .buildrc
----------------------------------------------------------------------------
---
AddMultiCVS("helix",":ext:marvin at cvs.helixcommunity.org:/cvsroot/")
AddBIFPath("common", "[helix]/common/build/BIF")
AddBIFPath("client", "[helix]/client/build/BIF")

SetSDKPath("dxsdk", "c:\\dxsdk")
SetSDKPath("ms_psdk", "C:\\Program Files\\Microsoft SDK")
SetSDKPath("SYMBIAN61SDK",  "c:\\symbian\\6.1")
SetSDKPath("SYMBIAN70SSDK", "c:\\symbian\\7.0s\\Series60_v20")
----------------------------------------------------------------------------
---

----------------------------------------------------------------------------
---
2) envrionment variables: (HOME=c:\source)

set BUILD_ROOT=%HOME%\build

set SYSTEM_ID=symbian-61-emulator

set CVS_RSH=ssh

set EPOCROOT=\Symbian\6.1\Series60


set
PATH=C:\Symbian\6.1\Shared\EPOC32\gcc\bin;C:\Symbian\6.1\Shared\EPOC32\Tools
;%BUILD_ROOT%\bin;C:\Python23;C:\Program
 Files\GNU\WinCvs 1.3\CVSNT;%PATH%;C:\Program Files\perl\bin;c:\cygwin\bin
----------------------------------------------------------------------------
---


Thanks!
Marvin

----- Original Message ----- 
From: "Greg Wright" <gwright at real.com>
To: "marvin" <marvin at wirelessedge.ca>;
<common-dev at lists.helixcommunity.org>; <client-dev at lists.helixcommunity.org>
Sent: Monday, May 17, 2004 12:11 PM
Subject: Re: [Client-dev] Re: [Common-dev] ask for help on building problem


> > Hi, Greg,
> >
> > Thanks again!
> >
> > Now after I changed the SYSTEM_ID, and set
> > "SYMBIAN61SDK=C:\Symbian\6.1\Shared" then it starts to build.
> >
> > Is the 'SYMBIAN61SDK' set to the right value? (the Symbian SDK installed
on
> > C:\Symbian\...)
>
> Here is how I set mine:
>
> SetSDKPath("SYMBIAN61SDK",  "c:\\symbian\\6.1")
> SetSDKPath("SYMBIAN70SSDK", "c:\\symbian\\7.0s\\Series60_v20")
>
>
> --greg.
>
> >
> > Thank you very much!
> >
> > ----- Original Message ----- 
> > From: "Greg Wright" <gwright at real.com>
> > To: "marvin" <marvin at wirelessedge.ca>;
> > <common-dev at lists.helixcommunity.org>;
<client-dev at lists.helixcommunity.org>
> > Sent: Friday, May 14, 2004 6:33 PM
> > Subject: Re: [Common-dev] ask for help on building problem
> >
> >
> > > You SYSTEM_ID is set to "win32-i386-vc6". It should be
> > >
> > >     symbian-61-emulator  -- emulator build
> > >     symbian-61-thumb     -- device build.
> > >
> > > If you build for the device make sure to do a 'release'
> > > build.
> > >
> > > --greg.
> > >
> > >
> > >
> > >
> > > ----- Original Message ----- 
> > > From: "marvin" <marvin at wirelessedge.ca>
> > > To: <common-dev at lists.helixcommunity.org>;
> > <client-dev at lists.helixcommunity.org>
> > > Sent: Friday, May 14, 2004 5:27 PM
> > > Subject: [Common-dev] ask for help on building problem
> > >
> > >
> > >
> > > Hi, All,
> > >
> > > I tried to build the helixPlayer for symbian, but failed. While I can
> > checkout ribosome and build (and checkout-source code of) the
> > > 'command-line mp3 player'.
> > >
> > > My environment is:
> > > Windows 2000(+service pack4)
> > > VC6.0(+service pack 5)
> > > python2.3.3
> > > perl5.6.1 built for MSWin32-x86-multi-thread
> > > SSH: OpenSSH_3.8.1p1, OpenSSL 0.9.7d 17
> > > Concurrent Versions System (CVSNT) 2.0.8 (WinCVS 1.3)
> > > Symbian 6.1 SDKs
> > >
> > > Thanks very much for any help!
> > >
> > >
> > > Below goes the screen snapshot:
> > >
> > > Build System Menu
> > > -> Current Directory: C:\source\helix
> > > [0] Set BIF branch (hxclient_1_4_1_neptunex)
> > > [1] Set Target(s) (symbianinst)
> > > [2] Set Profile (helix-client-s60-basic)
> > > [3] run: build
> > > [4] Toggle make depend & makefiles (-e -n)
> > > [5] Toggle release (-trelease)
> > > [6] Toggle 'make clean'  (-c)
> > > [7] Toggle clobber (Dangerous!) (-C)
> > > [8] Toggle halt-on-error (-p green)
> > > [9] Toggle verbose mode (-v)
> > > [10] Toggle static build (-tnodll)
> > > [11] Checkout source for selected target now
> > > [12] Set Tag/Branch/Timestamp
> > > [13] Help Page (full help in build/doc/index.html)
> > > [Q] Quit
> > > Enter selection or flags: 3
> > > Updating [common] BIF files...
> > > Updating [client] BIF files...
> > > reading
> >
bif="C:\source\build\bif-cvs\helix\client/build/BIF\hxclient_1_4_1_neptunex.
> > bif" file
> > > computing dependency tree
> > >
> > > Build System (V2.2)
> > > time: Fri May 14 18:11:42 2004
> > > outfile: build.out
> > > branch: hxclient_1_4_1_neptunex
> > > platform: win32-i386-vc6
> > > distribution/archive from: win32-i386
> > > build Type: debug
> > > build options: debug
> > > profile: C:\source\build\umakepf\helix-client-s60-basic
> > > cvs revision: hxclient_1_4_1_neptunex
> > > copy target: debug
> > > target(s): symbianinst
> > > $Id: umake.py,v 1.40 2004/05/04 17:26:01 hubbe Exp $
> > > Using compiler: cl
> > > Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 12.00.8804 for
> > 80x86
> > > Copyright (C) Microsoft Corp 1984-1998. All rights reserved.
> > >
> > > getting files
> > >
> > > compiling
> > > UMAKE: Umakefil -> Makefile in
> > > UMAKE: Applying profile
C:\source\build\umakepf\helix-client-s60-basic.pf
> > > Umake warning: Module does not exist in BIF file.
> > > signing output binaries
> > > Build Complete: Fri May 14 18:11:43 2004
> > > copy path="debug" not found
> > >
> > > --- Build System Error ------------------------------------
> > > Cannot list directory="debug".
> > > -----------------------------------------------------------
> > >
> > > Thanks again!
> > >
> > >
> >
> --------------------------------------------------------------------------
> > ------
> > >
> > >
> > > > _______________________________________________
> > > > Common-dev mailing list
> > > > Common-dev at lists.helixcommunity.org
> > > > http://lists.helixcommunity.org/mailman/listinfo/common-dev
> > > >
> > >
> >
> >
> > _______________________________________________
> > Client-dev mailing list
> > Client-dev at lists.helixcommunity.org
> > http://lists.helixcommunity.org/mailman/listinfo/client-dev
>